The value of spray insulation is recognized during the application process. The materials are spray-applied and adhere to almost any substrate that they come in contact with; filling every crack and crevice along the way. Creating a tight building envelope is the fastest way to reduce energy consumption. Pa Foam & Coating’s spray foam insulation products provide a thermal and moisture management system.
Insulation should add value to:
- Energy savings
- Sustainability
- Air quality
- Safety
- Durability
- Comfort
There are two primary types of materials available in the spray foam insulation industry. Open-cell and closed-cell spray polyurethane foam systems ─ Pa Foam & Coating offers them both. Plus, we have created a special cold weather formula to extend the application season for our customers.
Spray Foam is a Perfect for:
- Residential Construction
- Commercial Construction
- Agricultural Applications
- Specialty Applications
At PA Foam and Coating LLC, we are committed to manufacturing quality products that help our spray foam applicators offer solutions that contribute to high-performance building objectives.
Spray foam roofing offers the highest R-value of any traditional roofing insulation, leading to decreased energy consumption. Spray foam roofing is a rigid, closed-cell plastic created by a combination of two liquid components, which react in seconds and can be walked on in a matter of minutes. This roof system insulates and creates a lightweight, seamless, waterproof blanket over the substrate.
Sustainable Roofing Benefits
- Superior cold temperature insulation performance
- Superior long-term insulation performance
- High compressive strengths
- Ease of application
- Zero ozone-depletion
PA Foam & Coating offers Cool Roof Ratings Council rated arylic elastomeric coatings to improve solar reflectance and thermal emittance. The result is a cooler building and reduced cooling costs.
Protective roof coating increases roof life expectancy by:
- Adding a waterproofing membrane
- Preventing substrate degrading UV light
- Resists staining and dirt pick-up
- Reducing risk of wind damage
- Reducing thermal shock
Thermo-Flex Acrylic Coatings
Acrylic roof coatings are water-based elastomeric coatings applied to a variety of surfaces for ultraviolet (UV) protection. Pa Foam & Coating’s acrylic coating line is available in a variety of formulations for application in hot climates, low or high-humidity climates or standard weather environments.
Thermo-Sil Silicone Coatings
Thermo-Sil is a single-component, moisture-curing silicone rubber roof coating system, specifically designed for use in roofing applications as the weather seal coating in spray applied polyurethane foam roofing systems with extremely high UV radiation protection characteristics.
To stop roof leaks, there are many options, from the most expensive (tear-off and replacement of the existing roof) to the least expensive (a quick patch). However, there is one option that can provide a watertight and aesthetically pleasing roof while significantly increasing service life: Restoration Coating System.
In addition to nice aesthetics and waterproofing, elastomeric coatings can add a reflective surface, which works to reduce heating and cooling equipment loads on temperature-controlled buildings. The Pa Foam & Coating Restoration Coating System is particularly economical compared to removing and replacing a roof.
The Restoration Coating System Approach:
Step 1: Inspect and evaluate existing roof condition
Step 2: Assess potential for restoration
Step 3: Draft custom restoration specification
Step 4: Clean and prime roof
Step 5: Install reinforced fabric or butyl tape to all seams and fasteners
Step 6: Re-seal roof penetrations with tape
Step 7: Apply the restoration coating base coat
Step 8: Apply the restoration coating top coat
